Display Route List; Tmc Function; Connecting The Tmc Antenna; Switch On Automatic Traffi C Jam Detours - Blaupunkt TravelPilot Lucca 3.5 Operating And Installation Instructions

Additional functions during the route guidance | TMC function

Display route list

The route list can be displayed to gain an overview
of the route.
u
Touch the symbol in the add-on
menu.
The route list is displayed.
u
Touch the buttons to scroll
through the route list.
u
Touch the symbol to exit the route list
again.
30

TMC function

The Traffi c Message Channel (TMC) supplies your
Lucca with traffi c reports that are broadcast by
the radio stations with the RDS (Radio Data Sys-
tem) signal. The transmitted traffi c reports can be
incorporated in the route calculation by the Lucca
and used for calculating an alternative route in
case of disturbances on the calculated route.
The symbol identifi es the traffi c obstruc-
!
tions. The concerned segments are marked
in red or in gray if they are outside your
route.
TMC is available in the following countries: Bel-
gium, Denmark, Germany, England, Finland,
France, Italy, Netherlands, Norway, Austria, Spain,
Sweden, Switzerland and Czech Republic.

Connecting the TMC antenna

u
Connect the supplied TMC antenna to the
TMC antenna input of the Lucca.
u
Attach the TMC antenna with the suction
cups as parallel as possible to the instrument
panel.
The Lucca can now receive traffi c reports, if
available.
The Lucca automatically continuously search-
es for a TMC station. If the reception quality
deteriorates, it immediately searches for a
new station.
Switch on automatic traffi c jam
detours
u
Touch the symbol in the Navigation
menu.
The Routing options menu is dis-
played.
u
Touch the symbol to activate (check
mark) or deactivate (no check mark)
automatic traffi c jam detours.