Copying A Destination From The Map; Storing The Position - Blaupunkt TravelPilot Lucca 3.5 Operating And Installation Instructions

Copying a destination from the map

u
Touch the symbol in the Navigation
menu.
The Destination Input menu is dis-
played.
u
Touch the button.
The display shows the second page
of the menu.
u
Touch the symbol.
The map is displayed.
u
Move and scale the map as described in the
chapter "Working with the map".
u
Touch a location of your choice.
The city is selected and its name appears
in the lower display bar.
u
Touch the button.
The coordinates to the selected loca-
tion are displayed.
u
Touch the Start Route Guidance button.
The route is calculated and the route guidance
started.
- or -
u
Touch the button to call up the add-
on menu.
You have now the following options:
– Defi ning route options (chapter
"Specifying route options")
– Calculating a route (ch. "Calcu-
lating a route")
– Saving a destination as favourite
(ch. "Managing destinations")
– Displaying a destination on the
map (ch. "Working with the
map")
Navigation | Storing the position

Storing the position

You can store your current position and later use
it as a destination.
u
Touch the symbol in the main menu
of the Lucca.
The map is displayed.
u
Touch the symbol.
The Navigation menu is displayed.
u
Touch the symbol.
The Position Information menu is
displayed.
This menu contains this information:
– The address of the current location, if it is
contained in the map material
– Latitude/Longitude: Current position in
east longitude and north latitude
– Altitude: Current height above mean sea
level
– The compass: Driving direction (reliable
information after approx. 5 km/h)
u
Touch the Save As Destination button.
The keyboard is displayed.
u
Enter a name for the destination and confi rm
with OK.
The destination is stored under the name en-
tered in the Favourites menu.
19