Table of Contents
Advertisement
Map display during route guidance
Map display during route
guidance
During the route guidance, the map display shows
you different navigation tools and route informa-
tion.
DANGER!
Disregarding the street routing can
lead to accidents
The information on the digital road maps may no
longer be current due to short-term changes (con-
struction, etc.).
Additional information, e.g. the speed limit, can
be shown only if they are contained in the map
material.
The signposts and local street routing always have
priority over the information of the navigation
device.
Navigation tools
The so-called "carsor" represents your
position.
The compass always points north (for ori-
entation)
Top fi eld: Name of next street
Bottom fi eld: Name of current street
The action arrow shows the next action
and the distance to that action.
When you come closer to the location of the next
action, a bar is shown on the right side: The fewer
yellow segments are displayed, the closer you are
to the location of the next action.
28
Voice output is activated.
Voice output is deactivated (muted).
Touching the symbol reactivates the voice
output.
Route information
The lower display bar shows the following route
information by default:
•
Remaining distance to destination.
•
Estimated time of arrival
Instead of the arrival time, you can also display the
remaining driving time.
For route guidance with several interim destina-
tions, the route information for the next interim
destination is displayed. In addition, you can show
the distance and time for the last destination.
For settings, please read the chapter "Working
with the map", "Performing map settings".
Speed limit
The speed limit is shown in the left area of
the map.
Note:
This information can be displayed only if
it is activated in the navigation settings.
(Ch. "Working with the map", "Performing
map settings")
Advertisement
Table of Contents
