Voice Output During Route Guidance; Map Display During Route Guidance - Blaupunkt TravelPilot 700 Operating And Installation Instructions

Voice output during route guidance

Your navigation device supports route guidance
with voice-prompted turn-by-turn directions and
announces turns in advance. In the process, it an-
nounces the street names. In the map/navigation
settings, you can activate and deactivate the voice
instructions of the navigation (description on the
CD/DVD, extended instructions, ch. "Working
with the map").
u
In the navigation, press the VOL - or VOL +
button to adjust the volume for the voice out-
put.
u
Touch the lower fi eld on the display to
repeat the last voice output.

Map display during route guidance

During the route guidance, the map display shows
you different navigation tools and route informa-
tion.
DANGER!
Disregarding the street routing can
lead to accidents
The information on the digital road maps may no
longer be current due to short-term changes (con-
struction, etc.).
Additional information, e.g. the speed limit, can
be shown only if they are contained in the map
material.
The signposts and local street routing always have
priority over the information of the navigation de-
vice.
Navigation tools
The so-called "carsor" represents your po-
sition.
The compass always points north (for ori-
entation)
Top fi eld: Name of next street
Bottom fi eld: Name of current street
The action arrow shows the next action
and the distance to that action.
When you come closer to the location of the next
action, a bar is shown on the right side: The fewer
yellow segments are displayed, the closer you are
to the location of the next action.
Voice output is activated.
Voice output is deactivated (muted).
Touching the symbol reactivates the voice
output.
Route information
The lower display bar shows the following route
information by default:
Remaining distance to destination.
Estimated time of arrival
(or remaining driving time)
Calling up the map/navigation settings
The description for the individual settings is lo-
cated on the enclosed CD/DVD in the extended
instructions (ch. "Working with the map").
u
Touch the symbol in the map view.
If a route guidance is currently active, a differ-
ent symbol is displayed:
u
Touch the symbol in the map view.
The drop-down menu is displayed.
Route guidance
37