Adding Staples - Toshiba e-studio 5520c Quick Start Manual

Chapter 3 REPLACEMENT OF SUPPLIES

Adding Staples

The procedure for adding staples of the Finisher (optional) is as follows.
Finisher (Optional: MJ-1103/MJ-1104)
1
Open the front cover of the Finisher.
3
Take the empty staple case out of the staple
cartridge.
5
Install the staple cartridge.

2
Take off the staple cartridge.
4
Install a new staple case into the staple cartridge.
6
Close the front cover of the Finisher.