Table of Contents
Advertisement
The feeder area
A-61140 January 2000
To clear the feeder area (Area A):
1. Turn off the power switch.
2. Lift up the lower access door.
CAUTION: Open and close the doors slowly.
3. Raise the front scan module.
4. Rotate the feed roller cover release lever downward while rotating
the feed roller cover up to expose the feed roller and separator roller.
5. Press and hold the gap release lever and remove all jammed
documents.
6. Rotate the feed roller cover to its original position.
7. Lower and latch the front scan module.
8. Close the lower access door.
7-5
Advertisement
Table of Contents
