Table of Contents
Advertisement
Temporary
operating values
A-61140 January 2000
Each of the 18 modes programmed at the time of installation contain
definitions that affect the output of the scanner. Each mode is
programmed to conform to the output requirements of a particular
application or group of applications.
There may be instances, however, when a particular application requires
some variation of an existing mode. In such instances, mode definitions
may be changed using available function codes. See Chapter 4,
Function Codes, for a listing and description of the available function
codes.
NOTE: Changes to mode definitions remain in effect until another
mode is selected or the side panel switch is turned off. The
original mode definition is only affected by these changes if the
mode overrides are saved (the mode override option may be
selected at installation and if selected, a plus sign (+) appears
in the first line of the status display).
3-3
Advertisement
Table of Contents
