Multi-Function Display; To Set The Clock - Yamaha 2012 TMAX XP500A Service Manual

EAS52240

MULTI-FUNCTION DISPLAY

EWA12312
WARNING
Be sure to stop the vehicle before making
any setting changes to the multi-function
display. Changing settings while riding can
distract the operator and increase the risk
of an accident.
1. Left set button
2. Fuel meter
3. Fuel level warning indicator " "
4. Odometer
5. Coolant temperature warning indicator "
6. Coolant temperature meter
7. Right set button
1. Tripmeter/fuel reserve tripmeter
2. Ambient temperature/average fuel con-
sumption/instantaneous fuel consumption
1. Clock
The multi-function display is equipped with the
following:
• A fuel meter
• A coolant temperature meter
• An odometer
• Two tripmeters (which show the distance
traveled since they were last set to zero)
• A fuel reserve tripmeter (which shows the
distance traveled when the remaining fuel in
the fuel tank reaches approximately 3.0 L
(0.79 US gal, 0.66 Imp.gal))
• A self-diagnosis device
• A clock
• An ambient temperature display
• A fuel consumption display (average and
instantaneous consumption functions)
• An oil change tripmeter (which shows the
distance traveled since the last engine oil
change)
• A V-belt replacement tripmeter (which shows
the distance traveled since the last V-belt
replacement)
TIP
"
• Be sure to turn the key to "ON" before using
the left and right set buttons.
• When the key is turned to "ON", all of the dis-
play segments of the multi-function display
will appear one after the other and then dis-
appear, in order to test the electrical circuits.
Clock
1. Clock

To set the clock:

1. Push the left set button and right set button
together for at least two seconds.
2. When the hour digits start flashing, push
the right set button to set the hours.
3. Push the left set button, and the minute dig-
its will start flashing.
4. Push the right set button to set the minutes.
1-4
FEATURES