Important Notes; Safety; Notes On Installing And Removing Boards - Fujitsu Siemens SCENIC 600 Operating Manual

Important notes

In this chapter you will find information regarding safety which it is essential to take note of when
working with your PC. The manufacturer's notes contain helpful information on your PC.

Safety

Pay attention to the information provided in the manual "Safety, Guarantee and
!
Ergonomics" and to the following notes.
•
During installation and before operating the device, please observe the instructions on
environmental conditions in the chapter entitled
the chapter "Preparation for use and
•
Please check whether the device is set to the local power supply (see chapter
use and operation").
•
The main switch and the ON/OFF switch do not disconnect the system unit from the line
voltage. To disconnect the line voltage completely, remove the power plug from the grounded
power outlet.
•
Replace the lithium battery on the system board in accordance with the instructions in the
chapter "System expansions
•
Caution: components in the system can get very hot.
•
Keep this Operating Manual together with your device. If you pass on the device to third
parties, you should include this manual.

Notes on installing and removing boards

A26361-K520-Z100-4-7619
operation".
- Replacing processor and lithium
Boards with electrostatic sensitive devices (ESD) are identifiable by the
label shown.
When you handle boards fitted with ESDs, you must observe the following
points under all circumstances:
•
You must always discharge yourself (e.g. by touching a grounded
object) before working.
•
The equipment and tools you use must be free of static charges.
•
Pull out the power plug before inserting or pulling out boards containing
ESDs.
•
Always hold boards with ESDs by their edges.
•
Never touch pins or conductors on boards fitted with ESDs.
"Technical data" as well as the instructions in
battery".
"Preparation for
3