Kodak DCS 500 Series User Manual page 233

14-10
5
Select the Menu icon then
choose Main menu from the
dropdown menu (page 2-11).
6
Select Firmware from the Main
menu.
7
The Firmware screen appears.
8
Select your choice.
If you choose Version, the
version number of the firmware
in the camera appears.
If you choose Update from card,
a second screen appears.
9
Choose OK or Cancel.
If you choose Cancel, the
firmware is not updated.
If you choose OK,
approximately 15 seconds pass
and a third screen appears.
10
Choose OK.
11
Turn your camera off, then on to
start the new firmware.