Kodak DCS 500 Series User Manual page 175

Setting Flash Exposure Compensation with the Speedlite
Please refer to the 540EZ or 430EZ instruction book for details. In this case, the flash
exposure compensation amount is displayed on the Speedlite's LCD panel.
Flash exposure compensation amounts other than 0 set with the Speedlite override
flash exposure compensation amounts set with the camera when the Speedlite is on.
8-56
3
Releasing the Metering Mode
selector/Flash Exposure
Compensation button completes
the flash exposure compensation
setting. The Top LCD panel
returns to its normal condition
and (flash exposure
compensation symbol) lights in
the display to indicate that flash
exposure compensation is set.
The +/- symbol in the
viewfinder data display also
lights up when the Shutter
button is pressed halfway. (The
compensation amount is not
displayed in either location.)
Flash exposure compensation
remains set until manually
canceled. To cancel, repeat step
2 to return the flash exposure
compensation amount to 0.
The exposure compensation
amount remains set even if the
Main switch is set to ( ).
L