Kodak DCS 500 Series User Manual page 142

5
Press and hold the Shooting
Mode Selector button and turn
the Main dial until "DEP"
appears in the Top LCD panel.
DEP
6
Release the Shooting Mode
Selector button.
7
Place the selected focusing point
on the nearest point you want in
focus (point 1), then press the
Shutter button halfway.
When the In-focus indicator and
"dEP 1" light up in the
viewfinder, remove your finger
from the Shutter button.
8
Place the same focusing point on
the farthest point you want in
focus (point 2), then press the
Shutter button halfway again.
When the In-focus indicator and
"dEP 2" light up in the
viewfinder, remove your finger
from the Shutter button.
Points 1 and 2 can be reversed
if desired.
8
8-23