Kodak DCS 500 Series User Manual page 146

M
The indicator shows that the set exposure will
be one stop over the metered exposure.
Custom Function F-5
(page 6-6)
Custom Function F-6
Custom Function F-11
5
Press the Shutter button halfway
to focus the subject. "M" and the
exposure values are displayed in
the viewfinder. The Exposure
Level indicator at the right of the
viewfinder shows how far the
current exposure setting is from
the exposure value metered by
the camera.
6
Set the shutter speed and
aperture value as desired while
watching the exposure level
display, then press the Shutter
button completely to take the
picture.
This custom function lets you
switch the functions of the Main
dial and Quick Control dial.
In addition to 1/3-stop increments,
shutter speeds and aperture values
can also be input in 1-stop or
1/2-stop increments.
This function lets you set the
aperture value using the Focusing
.....
Point Selector button(
combination with the Main dial.
8
) in
8-27