Canon MF8580Cdw Manual page 352

3
Click [Auto Detect], select the machine when it is detected, and click [Next].
NOTE:
If the machine is not detected
Click [Refresh]. If the problem persists, click [IP address] or [MAC address], enter the IP address or MAC address
of the machine
4
Click [Add]
5
Click [Close].
Changing the port type or number
If the printing protocols (
have been changed on the machine, the corresponding settings on the computer must also be configured. This change is only
available for LPR or RAW ports.
1
Click [Configure Port].
2
Click the [LPR] or [RAW] radio button in [Protocol Type], change the number in the [Port Number] text
box as necessary, and then click [OK].
4
Click [Close].
Downloaded from ManualsPrinter.com Manuals
Viewing Network Settings, and then click [Next].
[Finish].
Configuring Printing Protocols and WSD Functions) or port numbers ( Changing Port Numbers)