By default, the main copy screen is displayed immediately after the machine is turned ON or when the Auto Reset function is
performed. Specify the setting to change the default screen and display the main screen of a different function.
Copy
*1
Fax
Scan
Memory Media Print
Select a function to display the desired screen
Brightness
Adjust the brightness of the display to suit the installation location of the machine.
Five Levels
brightness
Invert Screen Colors
Select <On> to invert the display colors. Select <On> if the display is hard to view even after the brightness was adjusted in
<Brightness>.
Off
On
<Off>
Millimeter/Inch Entry Switch
Select the unit of measurement.
Millimeter
Inch
<Millimeter> or <Inch>
Downloaded from ManualsPrinter.com Manuals
<Preferences>
<Display Settings>
<Preferences>
<Display Settings>
<Apply>
<Preferences>
<Display Settings>
<Preferences>
<Display Settings>
<Default Screen after Startup/Restoration>
<Brightness>
Use
<Invert Screen Colors>
<Millimeter/Inch Entry Switch>
/
to adjust the
Select <On> or
Select