When placing documents in the feeder in step 1
When scanning is complete, the e-mail is sent.
When placing documents on the platen glass in step 1
When scanning is complete, follow the procedures below.
1
If there are additional pages of documents to be scanned, place the next document on the platen glass,
and press
Repeat this step until you finish scanning all of the pages.
When there is only one page to be scanned, proceed to the next step.
2
Press <Start Sending>.
The e-mail is sent.
TIPS
If you always want to scan with the same settings:
Changing Default Settings
If you want to specify the e-mail sender name:
Register Unit Name (E-Mail)
LINKS
Canceling Sending Documents (E-mail/Shared Folder) (MF8580Cdw / MF8550Cdn / MF8540Cdn Only)
Checking Log for Sent Documents (E-mail/Shared Folder) (MF8580Cdw / MF8550Cdn / MF8540Cdn Only)
Downloaded from ManualsPrinter.com Manuals
.