Configuring SNTP
NOTE
The SNTP of the machine supports both NTP (version 3) and SNTP (versions 3 and 4) servers.
1
Start the Remote UI and log on in System Manager Mode.
2
Click [Settings/Registration].
3
Click [Network Settings]
4
Click [Edit...] in [SNTP Settings].
5
Select the [Use SNTP] check box and specify the required settings.
Downloaded from ManualsPrinter.com Manuals
Simple Network Time Protocol (SNTP) enables you to adjust the system clock by using the time server on the
network. The protocol is typically used for synchronizing the machine and a server, such as when the machine
needs to access an LDAP server with the security authentication that was enabled. The time is adjusted based
on Coordinated Universal Time (UTC), so specify the time zone setting before configuring SNTP
(
Date/Time Settings). SNTP settings can be specified via the Remote UI.
[TCP/IP Settings].
Starting Remote UI
0ALJ-092