Canon MF8580Cdw Manual page 391

3
Specify authentication and encryption settings as necessary.
Specify these settings only when [Authentication On/Encryption On] or [Authentication On/Encryption Off] has
been selected for [Security Settings].
[Authentication Algorithm]
Click the [MD5] or [SHA1] radio button for the algorithm that corresponds to your network environment.
[Encryption Algorithm]
Click the [DES] or [AES] radio button for the algorithm that corresponds to your network environment.
[Set/Change Password]
To set or change the password, select the check box and enter between 6 and 16 alphanumeric characters for
the password in the [Authentication Password]/[Encryption Password] text box. For confirmation, enter the same
password in the [Confirm] text box. Passwords can be set independently for authentication and encryption
algorithms.
4
Specify the context name that identifies an SNMP context.
[Context Name 1]/[Context Name 2]/[Context Name 3]
Enter up to 32 alphanumeric characters for the context name. Up to three context names can be registered.
Disabling SNMPv3
Clear the [Use SNMPv3] check box.
7
Specify Printer Management Information Acquisition Settings.
With SNMP, the printer management information, such as printing protocols and printer ports, can be monitored and obtained
regularly from a computer on the network.
[Acquire Printer Management Information from Host]
Select the check box to enable monitoring of the printer management information of the machine via SNMP. To disable monitoring
of the printer management information, clear the check box.
Click [OK].
Downloaded from ManualsPrinter.com Manuals