Installing Your Printer On Additional Computers On The Network; Connecting To Another Kodak All-In-One Printer - Kodak HERO 7.1 Extended User Manual

Installing your printer on additional computers on the network

Connecting to another KODAK All-in-One Printer

To add your printer to another computer(s) on your network, install the KODAK
All-in-One Printer Software on each computer.
1. Go to www.kodak.com/go/aiodownloads.
2. In the results list, click the link for KODAK All-in-One Printer Software for your
computer's operating system.
3. Follow the on-screen instructions.
If you are connecting to a newer model printer (for example, you have an ESP 7250
Printer and now you are adding a HERO 7.1 Printer), you must install the KODAK
All-in-One Printer Software for the newer model.
NOTE: When you install the new software, the printer driver for the ESP 7250
Printer will be uninstalled, and updates for the ESP 7250 Printer will be
installed in addition to the driver for the HERO 7.1 Printer.
On a computer with WINDOWS OS:
1. Select Start > All Programs > Kodak > KODAK Printer Network Setup Utility .
• If your wireless printer (example: KodakHERO7.1+0229) is not listed:
a. Select No, my printer is not listed , then click Next .
b. From the drop-down list, select your printer.
c. Select Network - Wireless/Wi-Fi , then click Next .
When your printer is detected, driver installation begins.
• If your wireless printer (example: KodakHERO7.1+0229) is listed:
a. Select the printer that is connected to your network.
b. Select Yes, my printer is listed , then click Next .
When your printer is detected, driver installation begins.
2. When driver installation is complete, click Done .
On a computer with MAC OS:
1. Select Apple > System Preferences .
2. Under Hardware, select Print & Fax or Print & Scan .
3. Click + in the dialog box.
4. Select your printer from the list.
5. Click Add , if required.
www.kodak.com/go/aiosupport
KODAK HERO 7.1 All-in-One Printer
15