Kodak HERO 7.1 Extended User Manual page 17

4. Touch your network name.
If you don't see your network in the list, or you want to change your network,
touch Rescan for Wireless Networks .
NOTE: If the name of your network is not listed, make sure your wireless router
is turned on and within range.
5. If your network requires a password, use the LCD keyboard to enter your
Security String. The Security String is case-sensitive. When you are finished,
touch OK .
6. When the confirmation message appears, touch OK .
When the printer is successfully connected, the Wi-Fi connectivity LED will stop
blinking and remain lit.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, KodakHERO7.1+0229)
7. If you haven't installed the KODAK All-in-One Printer Software:
a. Go to www.kodak.com/go/aiodownloads.
b. In the results list, click the link for KODAK All-in-One Printer Software for
your computer's operating system.
c. Follow the on-screen instructions.
www.kodak.com/go/aiosupport
KODAK HERO 7.1 All-in-One Printer
11