Troubleshooting; Troubleshooting "Quick Start; General Troubleshooting; Printer Fails To Power On - Kodak ESP 9 User Manual

Kodak all in one printer user manual
Hide thumbs Also See for ESP 9:
Table of Contents

Advertisement

10

Troubleshooting

Troubleshooting "quick start"

General troubleshooting

Printer fails to power on

Kodak provides several methods to help you troubleshoot your All-in-One printer
issues. Here are some quick tips:
• Turn off your printer and then unplug it. Wait five seconds, and then plug the
power cord back into the printer. Finally, turn the printer back on.
• Confirm that you are using a 2.0 USB cable to connect the printer to your
computer. If you need to buy one, they are available online at
www.kodak.com/go/aio, or from your local electronics and printer retailer.
• Make sure that you have the most up-to-date All-in-One printer software and
Help files from the Internet. Visit
latest files.
• View the troubleshooting information found in Kodak Home Center software on
your computer. After opening Home Center, click the question mark ( ? ) button:
• Macintosh: The
window.
• Windows: The
window.
Use the Help window to view troubleshooting topics. (Windows users can also
select Troubleshoot from the Help panel on the main Home Center window.)
• You can also get troubleshooting help at the Kodak Web site. Visit
www.kodak.com/go/support
NOTE: Many issues with degradation in performance or print quality can be
resolved by meeting or exceeding the recommended system requirements.
See
Chapter 11 , Product and Safety
Probable Cause
The power supply is not properly connected.
Corrective Action
• Make sure the electrical power cord is connected to the alternating current
power adapter, and is plugged into a grounded power outlet or power strip.
• If using a power strip, make sure it is turned on.
• If using a switched power outlet, make sure the switch is on.
• Make sure the power outlet is supplying power.
• Verify the light on the Kodak printer power cord plug is lit.
www.kodak.com/go/aiosupport
www.kodak.com/go/support
button is located at the lower-left of the Home Center
button is located at the upper-right of the Home Center
for support for your Kodak printer.
Specifications.
to download the
89

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8437477 - easyshare esp 9 all-in-one printerEsp 9200 series

Table of Contents