Kodak ESP 9 User Manual page 65

3. Press Zoom + to enable the zoom and crop function. You can enlarge the photo
in .25X increments, up to a 5X magnification. Press Zoom – to decrease the
magnification in .25X increments, to 1X.
NOTE: The changes you make to the photo apply only to viewing and printing the
photo; they are not saved on the memory card or storage device.
4. Use the , ,
part of the picture you want to print.
5. Press OK when finished. The photo is displayed with the original view, and a
border ("crop box") is displayed around the area you want to use.
Tip : You can make more precise zoom and crop adjustments to your photos on
your computer using photo editing software. To send a photo from the
All-in-One printer to your computer, see
page 58.
6. If you are satisfied with the image shown, press Start to print the area displayed
in the crop box. If you want to specify additional print parameters for the photo,
press Menu to display the Print Photos Options menu. A sample of the menu is
shown in the illustration below.
7. Here you can press
value is displayed between the
to select the value you want.
8. Press Start to print the selected photo, or press
Press OK .
9. Press or until you view another photo you want to print.
www.kodak.com/go/aiosupport
and navigation buttons on the control panel to display the
until the parameter you want to adjust is selected. If a
and
Kodak ESP 9 All-in-One printer
Transferring images to a computer,
symbols in the row, press
until View Photos is selected.
or
57