Maintaining Your Printer
Monitoring and adjusting the printer's performance
Maintenance options
78
5. If further cleaning is needed, repeat the previous steps using isopropyl (rubbing)
alcohol, and wipe the underside thoroughly with a damp cloth to remove any
residual alcohol.
6. When finished cleaning, plug in the printer.
From the control panel, you can perform many tasks to keep this printer in good
working order. For example, you can check the status of the printer's inkjet nozzle to
ensure high-quality prints. Kodak recommends that you run a nozzle check if you are
experiencing changes in image quality. You can also use the Printhead Alignment
function if you see degradation in print quality.
1. Make sure that there are 5–10 sheets of plain paper loaded in the bottom paper
tray.
2. Press Menu to display the main menu.
3. Press
until Maintenance is selected.
4. As needed, press
5. Press OK .
6. Follow the prompts on the LCD screen to initiate or cancel the task.
These available maintenance options are shown in the following table.
Menu Options
Check Ink Levels
Check Paper Levels
Nozzle Check
Printhead Alignment
Clean Printhead
Print Test Page
Format Memory Card
WARNING: Formatting will erase all the data on a memory card.
www.kodak.com/go/aiosupport
until the desired option is selected.
Select
OK
OK
OK
OK
OK
OK
OK