User Guide On The Cd Is Obsolete; Wrong Paper Size; Macintosh Os X Troubleshooting - Kodak ESP 7 User Manual

User guide on the CD is obsolete

Wrong paper size

Macintosh OS X troubleshooting

Non-intel Mac only: black screen or screen freeze occurs when applying printer settings via the Home
Center software
• Close any unnecessary software applications, and minimize any remaining
application windows. Follow any messages on the screen that may have been
hidden by other windows.
• Disconnect, then reconnect the USB cable from the printer to the computer.
• Make sure you are using a high-quality USB cable which is communicating with
the computer. (See
• If the pictures are on a USB device, make sure it uses a supported file system
(see Device not recognized, page
• Make sure your computer meets the minimum system requirements for using
your printer (see General troubleshooting, page
necessary.
Probable Cause
The User Guide has been updated since the software CD was released.
Corrective Action
• Download the most recent version of the User Guide from Kodak.com.
Probable Cause
The print size or paper size you selected may be larger or smaller than the paper
found in the paper tray.
Corrective Action
• Replace the paper in the paper tray with the correct size.
• Press OK .
If the situation continues, contact Kodak support.
Probable Cause
This error only occurs with non-Intel Macintosh computers running Leopard OS
version 10.5. Apple has confirmed that there are problems running the latest version
(Leopard) on G5 processors.
Corrective Action
• Upgrade to Macintosh OS 10.5.2.
www.kodak.com/go/aiosupport
No communication with computer, page
68).
KODAK ESP 7 All-in-One Printer
70.)
67). Upgrade your system if
73