Printing Tagged Images; Printing From A Bluetooth-Enabled Device - Kodak ESP 7 User Manual

Viewing and Printing Photos

Printing tagged images

Printing from a Bluetooth–enabled device
42
The Digital Print Order Format (DPOF) is an industry-standard file that can be
created by some digital cameras. Camera selected photos are photos you tag for
printing with your digital camera. When you select photos with your camera, the
camera creates a DPOF file that identifies which photos have been tagged for
printing. Your printer can read the DPOF file from the memory card so you do not
have to re-select the photos to print.
NOTE: Not all digital cameras support tagging or the creation of tagged image
(DPOF) files. Refer to your camera's user guide to ensure it supports this
function.
When you print tagged photos, the selected layout is applied unless your camera
allows selection of sizes. If not specified by the DPOF information, the current
default print photo size and other settings will be used.
Bluetooth wireless technology allows wireless connectivity between compatible
electronic devices. Your printer allows you to print .jpg images from a
Bluetooth–enabled device, using an optional Kodak USB Bluetooth 2.0 USB adapter.
You can purchase the Kodak Bluetooth adapter from Kodak at
www.kodak.com/go/accessories.
The Kodak Bluetooth adapter (shown below) supports connectivity between your
printer and the following Bluetooth–enabled devices:
• Mobile camera phones
• Personal Digital Assistants (PDAs)
• Digital still cameras
• Computers
The Bluetooth adapter will not work when plugged directly into computers, Kodak
printer-docks, other types of Kodak printers or devices made by other
manufacturers. This adapter works exclusively with KODAK All-in-One Printers.
To enable Bluetooth wireless connectivity, plug the Kodak Bluetooth adapter into the
USB port located on the front panel of your printer.
www.kodak.com/go/aiosupport