Scanning Multiple Originals Simultaneously; Adjusting Scan Settings - Kodak ESP 7 User Manual

Scanning

Scanning multiple originals simultaneously

Adjusting scan settings

52
When the Scan What option is set to Photo in the Home Center software, your
All-in-One printer can detect multiple photos placed on the scanner glass. Allow
some space on the scanner glass between each item, and use the Home Center
software to save each photo as a separate file. Any images on the scanner glass that
overlap are interpreted by the software as a single image file.
CAUTION:
Home Center cannot interpret two or more documents, photos, or a
combination of documents and photos, as separate scanned items when the
Scan What option is set to Document.
You can change the default scan settings for your printer using the control panel.
When you change scan settings from the control panel, the settings apply only to
the current scan job. To apply scan settings to all future scan jobs, you can save your
changes.
1. From the control panel, press Menu .
2. Press until Scan is selected.
3. Press OK to display the Scan Options menu. A sample of the menu is shown in
the illustration below.
4. Here you can press
is displayed between the
the value you want.
5. Any changes you make to the scan settings apply only to the current scan
operation. To keep the settings as permanent, press
selected, and then press OK .
6. Press Start to initiate the scan.
The available scan settings are in the following table:
www.kodak.com/go/aiosupport
until the option you want to adjust is selected. If a value
and symbols in the row, press or to select
until Save as Defaults is