For Macintosh - Kodak ESP 7 User Manual

Setting Up Your Printer
Wi-Fi to Ethernet
Ethernet to Wi-Fi

For Macintosh

USB to Wi-Fi
USB to Ethernet
30
To convert the Wi-Fi connection from a PC to an Ethernet connection:
1. Connect the printer to the network (LAN port on the Router) with an Ethernet
cable.
To convert the Ethernet connection from a PC to a Wi-Fi connection:
1. Disconnect the Ethernet cable from the printer.
2. Configure the wireless network from the printer front panel. See
wireless network connection, page
3. Press Menu .
4. Press until Network Settings is selected, and then press OK .
5. Select View Network Configuration and confirm you have an IP address.
To convert the USB connection from a Macintosh to a wireless network connection:
1. Disconnect the printer from the computer.
2. Configure the wireless network from the printer front panel. See
wireless network connection, page
3. Press Menu .
4. Press until Network Settings is selected, and then press OK .
5. Select View Network Configuration and confirm you have an IP address.
6. Open System Preferences and then click Print & Fax . Click + button to view a list
of available printers that can be added. Network printers are labeled "Bonjour"
under "Kind".
7. The printer will be named KODAK ESP 7-XXXX, where XXXX is a number unique
to your printer.
8. Select your printer and click Add .
To convert the USB connection from a Macintosh to an Ethernet connection:
1. Disconnect the printer from the computer.
2. Connect the printer to the network (LAN port on Router) with an Ethernet cable
3. Open System Preferences and then click Print & Fax . Click + button to view a list
of available printers that can be added. Network printers are labeled "Bonjour"
under "Kind".
4. The printer will be named KODAK ESP 7-XXXX, where XXXX is a number unique
to your printer.
www.kodak.com/go/aiosupport
22.
22.
Configuring a
Configuring a