Kodak ESP 7200 Series User Manual page 12

Configuring Your Printer
6
The printer searches for available wireless networks within range, then displays
the list in order of signal strength. For example:
NOTE: If there are more networks than can be shown on the LCD, a
symbol appears in the bottom right of the display. If you don't see your
network in the list or want to change your network, select Rescan for
Wireless Networks , then press OK .
4. Press to select your network, then press OK .
5. If your network requires a password, "Enter Security String" and a keyboard
appear on the LCD. Press
your password, using the correct uppercase and lowercase letters. Press OK
after each character. When your security string is entered, select DONE , then
press OK .
• To erase a character, select BKSP (backspace), then press OK .
• To change from uppercase to lowercase, select abc/123 , then press OK .
• To change from lowercase to uppercase, select ABC/123 , then press OK .
• To enter punctuation or symbols, select !@# , then press OK .
6. When the confirmation message appears, press OK .
7. If you haven't yet installed the KODAK All-in-One Printer Software that came
with your printer, insert the software CD and follow the on-screen instructions
to install the software.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, KodakESP7200+1133).
www.kodak.com/go/aiosupport
, , or to select the letters and numbers of
(page down)