Updating The Software And Printer Firmware; Updating If Your Printer Is Connected To A Computer With Windows Os - Kodak ESP 7200 Series User Manual

Updating the software and printer firmware

Updating if your printer is connected to a computer with WINDOWS OS

13. Close the printer access door.
The printer detects the new printhead. Follow the instructions on the LCD to
calibrate your printer.
Using the latest software and firmware helps ensure optimal performance of your
printer.
NOTE: Firmware is the software that runs on the printer.
When you open Home Center Software on a computer with WINDOWS OS, the
software automatically checks for software and firmware updates. On a computer
with MAC OS, you have to check manually for updates.
Use the following procedure to update manually.
To update the software :
1. Make sure that your computer is connected to the Internet.
2. Open Home Center Software.
3. Click Tools and Documentation .
4. Under Web Links, click Check for Software Updates to check whether software
updates are available.
5. If there are updates, click Next and follow the on-screen instructions.
To update the printer firmware :
1. Make sure that your computer is connected to the Internet.
2. Connect the printer to the computer with a USB cable, Ethernet cable, or
wirelessly (if not currently connected).
3. Open Home Center Software.
4. Click Tools and Documentation .
5. Under Web Links, click Check for Printer (Firmware) Updates .
6. If there are updates, click Next and follow the on-screen instructions.
Do not turn off or unplug your printer or your computer during the update.
IMPORTANT:
www.kodak.com/go/aiosupport
KODAK ESP 7200 Series All-in-One Printer
63