Kodak ESP 7200 Series User Manual page 14

Kodak all-in-one printer user guide
Hide thumbs Also See for ESP 7200 Series:
Table of Contents

Advertisement

Configuring Your Printer
Using WPS to connect to a Wi-Fi network
8
If your router supports Wi-Fi Protected Setup (WPS), you can use WPS Connect.
WPS lets you configure your printer for a wireless network by pressing buttons or
entering a PIN.
To connect to a network using WPS:
1. Press Home .
2. Press
to select Network Settings , then press OK .
3. With WiFi Setup Wizard selected, press OK .
NOTE: The Wi-Fi radio is turned on automatically when you select Wi-Fi Setup
Wizard.
4. Press
to select WPS Connect , then press OK .
5. Select one of two methods of connecting:
Before you press
IMPORTANT:
push button is, or where to enter the generated PIN.
If necessary, consult your Internet service provider or router device
manufacturer's documentation for more information.
• To use push buttons:
a. With Push Button Configuration selected, press OK .
b. You will have two minutes to push the WPS button on your router (this may
either be a physical button on the router or a virtual button in the router's
software).
• To enter a PIN:
a. Press
to select Generate WPS PIN , then press OK .
b. Go to your router's software and locate the PIN button.
c. Enter the PIN you received on the LCD into the PIN screen for your router.
6. When the confirmation message appears, press OK .
7. If you haven't yet installed the KODAK All-in-One Printer Software that came
with your printer, insert the software CD and follow the on-screen instructions
to install the software.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, KodakESP7200+1133).
www.kodak.com/go/aiosupport
on the printer, make sure you know where the router's

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Esp7200 - extended guideEsp 7250 - all-in-one printer

Table of Contents