Configuring Your Printer; Configuring Printer Settings - Kodak ESP 7200 Series User Manual

2

Configuring Your Printer

Configuring printer settings

4
This section explains how to configure or change your printer settings and your
wireless network settings.
NOTE: When you first power on the printer, the printer automatically steps you
through the process of selecting the Language and Country/Region .
To set or change basic printer settings:
1. Press Home .
2. Press to select Printer Settings , then press OK .
3. Press to select one of the following settings:
• Date and Time *
– Press OK , then press
Press or
• Button Sounds
– Press to select On or Off .
• Time to Low Power
– Press to change the time to energy-saving low power (select from 1 to 4
hours in 0.5 hour increments). After the time to low power, the printer goes
into a low-power mode.
• DPOF Printing
– Press to select On or Off .
• Language
– Press OK , press
• Country/Region
– Press OK , press
• Reset All Settings (see
NOTE: Resetting factory defaults does not change the date and time, language, or
country/region.
4. Press Back to go back to the Main Menu.
* You can also synchronize the printer's date and time to your computer from Home
Center Settings under Tools in Home Center Software.
www.kodak.com/go/aiosupport
to select Year , Month , Day , Hour , or Minute .
to change the values; press OK when you are done.
to select a language, then press OK .
to select a country or region, then press OK .
Resetting factory defaults, page 65)