Adding A Network Connection To A Usb-Connected Computer; Changing From Usb To Wireless Connection - Kodak ESP 7200 Series User Manual

Adding a network connection to a USB-connected computer

Changing from USB to wireless connection

• If your wireless all-in-one printer (example: KodakESP7200+1133) is listed:
a. Highlight the all-in-one printer that is connected to your network.
b. Select Yes, my printer is listed , then click Next .
When your printer is detected, driver installation begins.
2. When driver installation is complete, click Done .
On a computer with MAC OS :
1. From the dock, open System Preferences .
2. Click Print & Fax .
3. On a computer with WINDOWS OS:
a. Click the + sign to add the printer.
b. Select the printer from the list of available printers, then click Add .
You can change the way you connect to your printer at any time.
To change the printer connection type from USB to a wireless (Wi-Fi) network:
If your printer is connected to a computer with WINDOWS OS:
1. On the printer control panel, press Home .
2. Press to select Network Settings , then press OK .
3. Press to select View Network Configuration , press OK , then confirm you have
an IP address.
4. If you have not already done so, connect your printer to your wireless network.
See Connecting to a wireless network, page
5. On your computer, disable any firewall you have installed until you have
successfully completed the installation For more information on firewalls, go to
www.kodak.com/go/inkjetnetworking.
6. Select Start > All Programs > Kodak > Kodak Printer Network Setup Utility .
• If your wireless all-in-one printer (example: KodakESP7200+1133) is not
listed:
a. Select No, my printer is not listed , then click Next .
b. From the drop-down list, select your printer: ESP7200 Series .
c. Select Network - Wireless/WiFi , then click Next .
When your printer is detected, driver installation begins.
• If your wireless all-in-one printer (example: KodakESP7200+1133) is listed:
a. Highlight the all-in-one printer that is connected to your network.
b. Select Yes, my printer is listed , then click Next .
When your printer is detected, driver installation begins.
www.kodak.com/go/aiosupport
KODAK ESP 7200 Series All-in-One Printer
5.
11