IBM System x3200 Type 4362 Problem Determination And Service Manual page 83

To remove a hot-swap power supply, complete the following steps.
Release lever
Hot-swap power
supply
1. Read the safety information that begins on page vii and "Installation guidelines"
on page 35.
2. Disconnect the power cord from the power supply that is to be removed.
3. Press down on the orange release lever and pull the power supply out of the
bay, using the handle.
4. If you are instructed to return the power supply, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Chapter 4. Removing and replacing server components
65