Troubleshooting The Stripe Volume - Dell Precision Workstation 450 User Manual

Using the arrow keys, select Activate/Delete RAID Array and press <Enter>.
3
Press any key to continue.
4
Use the <Page Up> or the <Page Down> keys to select the volume to be activated.
5
Press <F2> to return to the top menu.
6
Select Activate Array and press <Enter>.
7
Press any key to continue.
8
While the configuration utility activates the stripe volume and deactivates the other
stripe volumes, the following message appears:
. The main menu appears once the stripe volume is activated.
minute
NOTE: If a partial stripe volume is present and no longer part of a good array, the partial stripe
volume can be deleted, see "Deleting a Stripe Volume."

Troubleshooting the Stripe Volume

D
U R I N G I N S T A L L A T I O N
• Ensure that all devices are connected.
• Ensure that each device has a unique SCSI ID, including the SCSI controller.
• Ensure that the SCSI controller is enabled in the system BIOS.
• Ensure that all devices can be seen in the Fusion-MPT SCSI BIOS display
banner when the computer starts up.
• Reset the Fusion-MPT SCSI BIOS setting to default.
Processing...takes upto one
, S CS I
N O D R I V E S A R E F O U N D
—
Advanced Features
63