Dell Precision Workstation 450 User Manual page 161

If you are installing a new floppy drive rather than replacing a drive, remove the front-
4
panel inserts.
From inside the drive bay, gently press on each side of the insert until it pops out.
Check all cable connections, and fold cables out of the way to provide airflow for the
5
fan and cooling vents.
Close the computer cover.
6
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then
plug it into the computer.
Connect your computer and devices to electrical outlets, and turn them on.
7
1
1
power cable
2
floppy-drive cable
2
147
Drives