Adding A Memory Module - Dell Precision Workstation 450 User Manual

Adding a Memory Module

Press out the securing clip at each end of the memory module connector.
1
Align the notch on the bottom of the module with the crossbar in the connector.
2
Insert the module into the connector, ensuring that it fits into the guides at each end
3
of the connector. Carefully press each end of the module into place.
The memory module socket has alignment keys that allow the memory module to be
installed in the socket only one way.
Pull up on the securing clips to lock the modules into place.
4
If you insert the module correctly, the securing clips snap into the cutouts at each end
of the module.
When the memory module is properly seated in the socket, the securing clips on the
memory module socket should align with the securing clips on the other sockets with
memory modules installed.
Close the computer cover.
5
112 Memor y
3
1
1 notch
2 memory module securing
clips (2)
3 alignment keys
2