Running Telnet - Alcatel-Lucent 7210 SAS-D Installation Manual

Running Telnet

7210 SAS-D Installation Guide
MAC addresses are listed on a small label on the chassis. The MAC address also
displays in the
show router arp
The 7210 SAS-D must have a management IP address. The IP address is manually
configured.
Once the IP parameters are configured, you can access the CLI command line with a
Telnet connection. To establish a Telnet connection, run a Telnet program and issue
the Telnet command, followed by the IP address:
The following displays an example of a Telnet login:
C:\>telnet 10.10.10.25
Login: admin
Password: <enter password for user admin>
ALA-1#
Configuring the 7210 SAS-D
command output.
Page 71