Initializing The System And Downloading Software; Booting A 7210 Sas-D In The Lab; Configuring The 7210 Sas-D - Alcatel-Lucent 7210 SAS-D Installation Manual

Initializing the System and Downloading Software

Booting a 7210 SAS-D in the Lab

7210 SAS-D Installation Guide
The 7210 SAS-D ships with bootloader and TiMOS in flash. When the system is
powered up for the first time, the bootloader will attempt an auto-init procedure (see
the System Basics Guide for more information). The auto-init can, however, be
interrupted and the boot operation can be controlled manually.
There are several ways to boot the 7210 SAS-D from the network. User can choose to
boot the device using one of the following options:
• Using the image shipped along with the box to boot the device
• Using the network to load the image and boot the device
By default the device is configured to use the network to load the image. The
following sections describe how to boot the device using either of the options listed
above.

Configuring the 7210 SAS-D

Page 53