Mvme761 Transition Module Preparation - Motorola MVME2603-1121A Installation And Use Manual

MVME761 Transition Module Preparation

The MVME761 transition module
board are used in conjunction with the following models of the
MVME2603/2604 base board:
The features of the MVME761 include:
The features of the P2 adapter board for the MVME761 include:
MVME2603-1121A
MVME2603-1131A
MVME2603-1141A
MVME2603-1151A
MVME2603-1161A
A parallel printer port (IEEE 1284-I compliant)
An Ethernet interface supporting 10Base-T/100Base-TX
connections
Two EIA-232-D asynchronous serial ports (identified as
and on the front panel)
COM2
Two synchronous serial ports (
front panel), configurable for EIA-232-D, EIA-530, V.35, or
X.21 protocols
Two 60-pin Serial Interface Module (SIM) connectors, used
on configuring serial ports 3 and 4
A 50-pin connector for SCSI cabling to SCSI devices
Jumper-selectable SCSI terminating resistors
Fused SCSI teminator power developed from the +5Vdc
present at connector P2
A 64-pin 3M connector to the MVME761
Hardware Preparation and Installation
(Figure 1-12) and P2 adapter
MVME2604-1121A
MVME2604-1131A
MVME2604-1141A
MVME2604-1151A
MVME2604-1161A
and
SERIAL 3
COM1
on the
SERIAL 4
1-25
1