Table of Contents
Advertisement
MVME712M-Compatible Versions
The following tables summarize the pin assignments of connectors
that are specific to MVME2603/2604 modules configured for use
with MVME712M transition modules.
VMEbus Connector P2 (MVME712M I/O Mode)
Two 160-pin connectors (P1 and P2) supply the interface between
the base board and the VMEbus. P1 provides power and VME
signals for 24-bit addressing and 16-bit data. Its pin assignments are
set by the VMEbus specification. P2 rows A, C, Z, and D provide
power and interface signals to the MVME712M transition module.
P2 row B supplies the MVME2603/2604 with power, with the
upper eight VMEbus address lines, and with an additional 16
VMEbus data lines. The pin assignments for P2 are listed in
10.
SCSI Connector (MVME712M I/O Mode)
The SCSI connector for the MVME2603/2604 is a 50-pin connector
located on the front panel of the MVME712M transition module.
The pin assignments for the SCSI connector are listed in
Connector Pin Assignments
Table 4-
Table
4
4-11.
4-17
Hide quick links:
Advertisement
Table of Contents
