Table Of Contents - Motorola MVME2603-1121A Installation And Use Manual

Chapter 1 Hardware Preparation and Installation
Introduction
Equipment
Overview of Startup Procedure
Unpacking Instructions
Hardware ConÞguration.....................................................................................1-5
MVME2603/2604 Base Board Preparation
Cache Mode Control (J3)
Flash Bank Selection
Serial Port 4 Receive Clock ConÞguration (J16)
Serial Port 4 Transmit Clock ConÞguration (J17)
Serial Port 4 Transmit Clock Receiver Buffer Control (J20)
Serial Port 3 Transmit Clock ConÞguration (J18)
System Controller Selection (J22)
Remote Status and
MVME712M Transition Module Preparation
Serial Ports 1-4 DCE/DTE ConÞguration
Serial Port 4 Clock
P2 Adapter Preparation
MVME761 Transition Module Preparation
Serial Ports 1 and 2
ConÞguration of Serial Ports 3 and
P2 Adapter Preparation (Three-Row)
P2 Adapter Preparation
Hardware Installation........................................................................................1-35
ESD Precautions...........................................................................................1-35
RAM200 Memory Mezzanine Installation
PMC Module
PMC Carrier Board Installation
MVME2603/2604 VMEmodule
MVME712M Transition Module Installation
MVME761 Transition Module Installation
System Considerations
MVME2603/2604 VMEmodule
..........................................................................................................1-1
Required............................................................................................1-3
.......................................................................................1-5
(J10).............................................................................1-7
Control.........................................................................1-14
ConÞguration..............................................................1-17
..............................................................................1-24
......................................................................................1-27
(Five-Row)..........................................................1-34
Installation..................................................................................1-38
......................................................................................1-50
.........................................................................1-4
.......................................................1-6
..............................................................................1-7
..............................................................1-14
................................................1-15
................................................1-17
....................................................1-25
4........................................................1-27
.......................................................1-32
.....................................................1-36
.......................................................................1-40
Installation...................................................1-42
.................................................1-44
.....................................................1-48
.................................................................1-52
Contents
........................................1-9
.................................... 1-11
...................1-12
....................................1-13
vii