Mvme712M Transition Module Preparation - Motorola MVME2603-1121A Installation And Use Manual

MVME712M Transition Module Preparation

The MVME712M transition module
board are used in conjunction with the following models of the
MVME2603/2604 base board:
The features of the MVME712M include:
The features of the P2 adapter board include:
MVME2603-2121A
MVME2603-2131A
MVME2603-2141A
MVME2603-2151A
MVME2603-2161A
A parallel printer port
An Ethernet interface supporting AUI connections
One synchronous/asynchronous, and three asynchronous
only, EIA-232-D multiprotocol serial ports
An SCSI interface (via P2 adapter) for connection to both
internal and external devices
Socket-mounted SCSI terminating resistors for end-of-cable
or middle-of-cable configurations
Provision for modem connection
Green LED for SCSI terminator power; yellow LED for
Ethernet transceiver power
A 50-pin connector for SCSI cabling to the MVME712M
and/or to other SCSI devices
Socket-mounted SCSI terminating resistors for end-of-cable
or middle-of-cable configurations
Fused SCSI teminator power developed from the +5Vdc
present at connector P2
A 64-pin DIN connector to interface the EIA-232-D, parallel,
SCSI, and Ethernet signals to the MVME712M
Hardware Preparation and Installation
(Figure 1-3) and P2 adapter
MVME2604-2121A
MVME2604-2131A
MVME2604-2141A
MVME2604-2151A
MVME2604-2161A
1
1-15