Check Staple Cartridge In The Saddle Stitch Unit - Toshiba e-STUDIO 520 Operator's Manual

3. "Check staple cartridge in the saddle stitch unit"

This message will be shown only if the Saddle Stitch Finisher (optional) is installed. When the staples in
the stapler of the Saddle Stitch Finisher (optional) run out, this message appears.
Replace the staple cartridge according to the following procedure.
1
Open the lower cover of the Saddle Stitch
Finisher.
2
Pull out the saddle stitch unit slowly.
10
3
Pull the handle of the stapler of the sad-
dle stitch unit to release the lock. Then
rotate the stapler approx. 60º clockwise.
• The stapler is locked and fixed when it comes to a near-horizon-
tal position.
322
10.WHEN THIS MESSAGE APPEARS
2
1