Configuration Of Options - Toshiba e-STUDIO 520 Operator's Manual

Configuration of options

1. Saddle Stitch Finisher (MJ-1024)
This finisher enables saddle stitching, in addition to sort/group finishing and stapling.
(The Hole Punch Unit (MJ-6003) and the Inserter (MJ-7001) sold separately can be installed to this fin-
isher.)
2. Finisher (MJ-1023)
This finisher enables sort/group finishing and stapling. (The Hole Punch Unit (MJ-6003) and the
Inserter (MJ-7001) sold separately can be installed to this finisher.)
3. Hole Punch Unit (MJ-6003)
This unit enables you to punch holes on printouts.
4. Inserter Unit (MJ-7001)
This unit enables you to insert a sheet of paper which does not need to be copied. An already copied
sheet, as well as a blank sheet, can be inserted. This inserter is also usable for single finishing opera-
tion without copying, such as stapling or hole-punching.
5. External Large Capacity Feeder (MP-4004)
This feeder enables you to feed LT paper up to 4000 sheets (20 lb. Bond). Thick paper (- 110 lb. Index)
can also be set in this feeder.
3
1
2
4
1
5
25