Tab Paper - Toshiba e-STUDIO 520 Operator's Manual

17. TAB PAPER

Tab paper copying and insertion are available. There are the following 3 modes.
1. Copying on the tab of tab paper ([COPY ON TAB])
2. Inserting blank tab paper prior to a selected page ([BLANK TAB INSERT])
3. Combination of copying on tab paper and inserting tab paper ([COPIED TAB INSERT])
1
• Before copying on tab paper, adjust the tab width. (
• The tab paper can be set in any one drawer and the bypass tray except Large Capacity Feeder. (The
recommendation is to set in the 2nd drawer.)
• Be sure to set "TAB PAPER" for the drawer for special uses. (
• Only LT/A4 can be used in this mode.
• When the optional finisher is attached to the equipment, only 5 or 8-bank tab paper is available.
Preparing an original to copy on the tab of the tab paper
LT/A4 originals are used. In copying on tab or copied tab insert, the image is shifted to copy the index of
the original on the tab position.
By setting the tab width and shift width, the image is shifted to copy the index of the original on the tab position.
2
P.176)
Tab width
Original

Tab paper

3
P.53 "Drawer for special uses")
Shift width*
* The shift width means the distance that
image should be shifted when copied
on the tab paper.
5
173