When Using The Multifunctional Digital Systems - Toshiba e-STUDIO 520 Operator's Manual

Multifunctional digital systems basic function
Hide thumbs Also See for e-STUDIO 520:
Table of Contents

Advertisement

When using the multifunctional digital systems

Warning
Do not place metallic objects or containers with water (flower vases, coffee cups, etc.) on or near the
multifunctional digital systems. And keep paper clips and staples away from the air vent. If not, a fire
could result or you could get an electric shock.
If the multifunctional digital systems becomes excessively hot, smoke comes out of it or there is an odd
smell or noise, proceed as follows.
Turn the main switch OFF and remove the plug from the outlet, then contact your service representa-
tive.
If the multifunctional digital systems will not be used for more than one month, remove the plug from
the outlet for safety purposes during that time.
If an insulation failure occurs, this could cause a fire or give you an electric shock.
Caution
Do not place heavy objects (9 lb. or more) on the original glass and do not press on it with force.
Breaking the glass could cause personal injury.
Do not place heavy objects (9 lb. or more) on the multifunctional digital systems. If the objects fall off,
this could cause injury.
Do not remove or connect the plug with wet hands, as this could give you an electric shock.
Do not touch the fuser unit or the metal area around it. Since they are very hot, you could be burned or
the shock could cause you to get your hand injured in the machine.
Be careful not to let your fingers be caught when closing the drawer.
This could injure you.
Be careful not to let your fingers be caught between the equipment and the finisher (optional).
This could injure you.
Do not touch the metal portion of the guide plate in the automatic duplexer as it could burn you.
Do not touch the hinge (= a connecting part) on the rear side of the Reversing Automatic Document
Feeder. This could catch and injure your fingers when you open or close the Reversing Automatic Doc-
ument Feeder.
Always keep hands and fingers clear of FINISHER TRAY HINGE, as the tray could move unexpect-
edly. Failure to do so could result in injury to your hand and/or fingers.
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents