Sending Business Cards (Business Card Scan) - Sharp MX-C312 Operation Manual

SENDING BUSINESS CARDS
(Business Card Scan)
Multiple business cards can be scanned and transmitted at once.
To use this function, the business card feeder must be attached to the automatic document feeder and "Business Card
Scan Option" must be enabled in the system settings (administrator). For the attachment procedure, see
CARD FEEDER" in "BEFORE USING THE MACHINE" (page 1-44).
1
Enter the destination fax number.
2
☞
ENTERING DESTINATIONS
Select the special modes.
(1) Touch the [Special Modes] key.
3
(2) Touch the [Business Card Scan] key.
Read the message that appears and then touch the [OK] key.
☞
SPECIAL MODES
Press the [BLACK & WHITE START] key.
Scanning begins. A beep will sound to indicate that scanning is finished.
4
To cancel scanning...
Press the [STOP] key (
This function cannot be used when the scan size is specified by numerical values.
System Settings (Administrator): Business Card Scan Option
Specify whether or not the business card scan function is used.
(page 4-17)
(page 4-65)
).
Load the business cards.
4-80
FACSIMILE
"BUSINESS
Contents