Sharp MX-C312 Operation Manual page 142

CONFIGURING THE PRINTER DRIVER FOR THE OPTIONS INSTALLED ON
THE MACHINE
After installing the printer driver, you must configure the printer driver settings appropriately for the options that have
been installed and the size and type of paper loaded in the machine. Follow the steps below to configure the printer
driver.
If the PPD driver is installed, see
When the PCL printer driver or PS printer driver is installed
Click the [Start] button (
In Windows XP/Server 2003, click the [start] button and then click [Printers and Faxes].
1
If [Printers and Faxes] does not appear in the [start] menu in Windows XP, click the [start] button, click [Control Panel],
click [Printers and Other Hardware], and then click [Printers and Faxes].
Open the printer properties window.
2
(1) Right-click the printer driver icon of the machine.
(2) Select [Properties].
Click the [Configuration] tab.
3
4
If the machine is being used on an IPv6 network, you must configure the options manually as explained in
automatic configuration
"When the PPD driver is installed" (page 1-103).
), click [Control Panel], and then click [Printer].
fails" (page 1-102).
1-101
BEFORE USING THE MACHINE
Click the [Auto Configuration] button.
The settings are automatically configured based on the
detected machine status.
"If
Contents