Clean The Main Charger - Sharp MX-C312 Operation Manual

• Take care not to let the tip of the charger cleaner become soiled by toner.
• Clean with the mark (
5 • Holes to be cleaned by the charger cleaner are indicated by labels similar to (A).
• Do not use the charger cleaner for any purpose other than cleaning the main charger.
6
Main charger
There are a total of 4 places to be cleaned in the machine as shown.
(2)
7
8

Clean the main charger.

(1) Gently push the charger cleaner all the way
(2) Gently pull the charger cleaner out.
(3) Repeat the above (1) to (2) three times.
) on the charger cleaner facing down.
(A)
Position of mark
Repeat step 5 with each of the other
main chargers.
Replace the charger cleaner in its
original position.
Insert the tip of the charger cleaner in toward the right and then
(1)
press down on the end of the charger cleaner. The charger
cleaner will lock into place.
Close the main charger cover and rotate
the lock levers in the direction of the
arrows to lock the cover.
☞
1-66
BEFORE USING THE MACHINE
in.
REPLACING THE DEVELOPER CARTRIDGE (page 1-55)
Contents