Sharp MX-C312 Operation Manual page 151

6
Click the [Next] button in the screen of step 5.
7
Click the [Finish] button.
8
Click the [Close] button in the screen of step 2.
9
When using a port created with "Standard TCP/IP Port"
In the screen that appears after you click the [Configure Port] button in the screen of step 3, make sure the [SNMP
Status Enabled] checkbox is not selected (
possible to print correctly.
(2) (3) (1)
). If the [SNMP Status Enabled] checkbox is selected (
1-110
BEFORE USING THE MACHINE
Configure the port settings.
(1) Select [LPR].
(2) Enter [lp].
(3) Click the [OK] button.
), it may not be
Contents